Overview; Installation - Initio INI-9100U User Manual

Microsoft Windows 95 Driver Installation

Overview

The Initio INI-9100U/9100UW will support Microsoft Windows 95 with the
addition of a software driver.
requires some experience in Windows 95 system setup and administration. The
device driver is transferred from the INITIO INI-9100U/9100UW DRIVER
DISK 1 to the hard drive where it is automatically initialized during the system
boot routine.
The following files are used for installation and will be found on the Initio INI-
9100U/9100UW DRIVER DISK 1:
INI910U.MPD
INI910U.INF

Installation

The INI-9100U/9100UW driver developed for Windows 95 is loaded during the
system boot routine and will remain resident on the drive. This is accomplished
by following one of the three installation procedures listed:
New Windows 95 installation.
Adding the Initio Windows 95 device driver to an existing Windows 95
system.
Updating INI910U.MPD device driver
Reference Documentation:
Windows 95 installation and user's guide
The systems setup and installation guide
The documentation for system peripherals
Initio documentation for the SCSI host adapter
The procedures described to make changes to the system have distinct
differences. It is strongly suggested that the selected procedure be read and
understood before proceeding with the system configuration changes. Please
read the instructions carefully.
The installation procedure described here
INI-9100U/9100UW SCSI Host Adapter Windows 95
miniport driver.
Windows 95 installation information file.
6-2