Using Multiple Host Adapters - Initio INI-9100U User Manual

4. If the INI-9100U/9100UW is NOT intended to be the bootable host
adapter, these instructions will guide you through changing the current
software settings for UnixWare to establish the INI-9100U/9100UW as a
non-bootable host adapter for your device:
At the system command prompt, type
/etc/conf/bin/idbuild -M i910u <ENTER>
cd / <ENTER>
shutdown -g0 ( 0 is Zero ) <ENTER>
Y <ENTER>
5. Exit the UnixWare program and reboot your system to initialize the new
device driver to control INI-9100U/9100UW.

Using multiple Host Adapters

UnixWare is capable of supporting up to eight SCSI busses. If you choose to
use multiple host adapters in your system, verify that each host adapter shared
interrupt level is set to IRQ10. Please refer to your system documentation to
set the interrupt levels.
Space for each INI-9100U/9100UW host adapter in the system is configured
and allocated by a separate line in the file /ETC/CONF/SDEVICE.D/I910U.
1. Verify that Y is selected in the second field at the line starting at I910u in
the file /ETC/CONF/SDEVICE.D/I910U for each INI-9100U/9100UW in
the system.
UnixWare will automatically rebuild the kernel when an additional INI-
9100U/9100UW is detected.
11-7