New Os/2 Installation - Initio INI-9100U User Manual

that the selected procedure be read and understood before proceeding. Please
read all instructions carefully.

New OS/2 installation:

These instructions will guide you through the Initio OS/2 device driver and
OS/2 installation at the same time. The program can be installed from floppy
diskettes or from CD-ROM. The OS/2 driver for the INI-9100U/9100UW will
be found on the INITIO INI-9100U/9100UW DRIVER INSTALLATION DISK
1. It is important that the INI-9100U/9100UW hardware has been installed
successfully before proceeding further.
1. Make a duplicate copy of OS/2 Diskette 1 using a blank diskette and
label it as "OS/2 Diskette 1 for INI-9100U/9100UW".
2. Copy the INI910U.ADD file from the INITIO INI-9100U/9100UW
DRIVER DISK 1 (OS/2 subdirectory) to the root directory on the
"OS/2 diskette 1 for INI-9100U/9100UW".
3. Using an appropriate text editor modify the CONFIG.SYS on the OS/2
Diskette 1 for INI-9100U/9100UW to include the new Initio driver
(see figure 9-1).
Enter: BASEDEV=INI910U.ADD and save the file.
9-3