Device Setup - Initio INI-9100U User Manual

Main menu options
The main menu provides five possible setup options for meeting your system
configuration.
Scan Bus

Device Setup

Adapter Setup
BIOS Setup
Disk Utility
Scan Bus
This option scans the SCSI bus. All device ID's are displayed on the
screen including SCSI ID's without devices attached. This allows for
a better definition of location and priority on the SCSI bus.
Device Setup
All device ID's for the INI-9100U/9100UW are displayed on screen,
including SCSI ID's without devices attached. This allows for a better
definition of location and priority on the SCSI bus.
Asynchronous Transfer. Use this option to set the synchronous data
transfer mode. The INI-9100U/9100UW host adapter will transfer data
at a maximum rate of 5 MBytes per second in asynchronous mode and
20 MBytes per second in synchronous mode. The INI-9100UW host
adapter will transfer data at a maximum rate of 10 Mbytes per second
in asynchronous mode and 40 Mbytes per second in synchronous
mode. Use this option to set the synchronous data transfer mode. The
default setting for this option is for synchronous operation. (no)
A device ID should only be changed if it conflicts with
another device address on the same bus. Refer to your
peripheral documentation for changing SCSI ID's.
The best ID for a bootable hard disk is SCSI ID 0.
4-3