Installation Basics - Initio INI-9100U User Manual

SCSI Devices Configuration
Internal devices only
External devices only
Internal and external devices
SCSI Devices Configuration
68-pin internal connector only
68-pin external device only
50-pin internal only
68-pin internal and 68-pin external
devices
50-pin and 68-pin internal devices
50-pin and 68-pin internal devices
and 68-pin external device

Installation basics

The INI-9100U/9100UW PCI to SCSI Bus Master host adapter is installed into
a computer system with a PCI bus. The host adapter supports 32-bit data
transfers across the PCI bus at speeds up to 133 MBytes per second. The Initio
host adapter has no switches or jumpers to set, increasing the ease of
installation.
The SmartSCSI
9100U/9100UW into most platforms and operating systems.
9100U/9100UW on board BIOS will allow for complete integration in those
systems that implement Plug and Play. With the SmartSCSI
are able to conveniently turn on or off the SCSI auto-termination as well as
manually control the SCSI terminators without opening the system unit to
table 2-1 INI-9100U possible termination settings
table 2-2 INI-9100UW possible termination settings
Setup Utility provides simple integration of the INI-
Host Adapter Termination
Host Adapter Termination
Low
High
On
On
On
Off
Off
Invalid Configuration
2-4
On
On
Off
The INI-
Setup Utility you
On
On
On
Off
On