Removing The Initio Driver From A Unixware System - Initio INI-9100U User Manual

Removing the Initio driver from a UnixWare system

1. Once a UnixWare session is established and a command prompt is ready,
type (recall that UnixWare is case sensitive):
Type: /etc/conf/bin/idinstall -d i910u <ENTER>
following files:
2. Then rebuild the UnixWare kernel by executing the following commands
at the system prompt:
/etc/conf/bin/idbiuld -B -K <ENTER>
/cp /etc/conf/cf.d/unix /stand/unix <ENTER>
cd/ <ENTER>
shutdown -g0 (where 0 is Zero) <ENTER>
Y <ENTER>
/etc/conf/mdevice.d/i910u
/etc/conf/sdevice.d/i910u
/etc/conf/pack.d/i910u/driver.o
/etc/conf/pack.d/i910u/space.c
/etc/conf/pack.d/i910u/disk.cfg
11-8
to delete the