Placing A Call In A Call Pickup Group; Ending A Call - Gigaset HiPath 3000 V3.0 or later M1 Professional Operating Instructions Manual

Conducting calls – the basic functions
Step-by-Step
> <
Group Pickup?
6
• place the call on hold and consult with someone
else in the room (
• place the call on hold and call a second partner
(
the call (
(
Rejecting a call
If you do not wish to be disturbed, you can reject the
call.
Confirm the message displayed with one of the two
Reject call
Display keys. The call is rejected and the caller hears the
busy tone.

Placing a call in a call pickup group

You can use your handset to pick up calls to telephones
within your call pickup group (set by the service engi-
neer). This is also possible when you are conducting a
call.
Prerequisite:
You hear that a telephone in your call pickup group is
ringing.
c
Press the Talk key. The message "Call for:" appears on
the display.
Call the system menu.
Menu
[
Select and confirm the menu item.
p
Conduct the call.

Ending a call

a k
or Press the On-hook key or place the handset in the
charging shell.
The call charges are displayed, depending on the com-
munication system.
page 51),
page 4) in order to forward (
page 51) or to set up a conference
page 52).
page 49) or toggle