Installing The Svr-1670 In A Rack; Working With Input/Output Terminals; Basic Connections To The Svr-1670 - Samsung SVR-1670 User Manual

Chapter 3. Hardware Installation

3. 1 Installing the SVR-1670 in a Rack

To use the SVR-1670 safely, please install the SVR in a rack using the enclosed rack mounts. Follow
these instructions to install the SVR-1670 in a rack.
Attach the enclosed rack mounts to the product.
1.
Attach the enclosed rack mounts to the product.
2.

3. 2 Working with Input/Output Terminals

This section discusses the proper handling of wires and cables when connecting sensors, relays and
other devices to the SVR-1670.
Handling Cable Ends
You might need to prepare cables before connecting them to terminal blocks. Different wire gauges
are needed for stranded wire or solid wire. Prepare the end of the wire by removing the following
amounts of insulation:
· Stranded wire : Strip 1/3 ~ 1/2 (8 ~ 10mm) of insulation off the end of the wire and solder it together.
Use AWG 22 ~ 26 wire.
18
Digital Video Recorder
Rack Mount
Rack
Rack Mount
SVR-1670
· Solid wire : Strip 1/3 ~ 1/2 (8 ~ 10mm) of insulation off the end of the wire. Use AWG 20 ~ 26.
Figure 3.2.1 Preparing Cables for Terminal Blocks
Wire Insertion and Removal
When inserting or removing a wire from a terminal block, do it while holding down the terminal block
with a screw driver.
Figure 3.2.2 Inserting and Removing Wires

3. 3 Basic Connections to the SVR-1670

This section explains how to connect devices to the SVR-1670, within the following subsections:
• Basic Connection Diagram
• Connecting Cameras
• Connecting a Monitor
• Connecting Audio
• Connecting the Power Cable
Always turn off the SVR-1670 and disconnect the power cord from its power source before
you connect devices to the SVR-1670.
Digital Video Recorder
19
SVR-1670