Rack Installation - Samsung SRN-473S User Manual

installation

rACK inSTALLATion

Install the Bracket-Rack as shown in the figure, and then fasten the
screws on both sides (2 screws on each side).
Fix the screws not to be loosened by vibrations.
`
Cautions when installing in the rack
To install multiple NVRs in the rack, make sure to separate the FOOT at the bottom of each NVR.
1. There are four FOOTs at the bottom of a NVR.
Press the projected parts at both-ends of each "fooT" and
turn it counterclockwise.
2. "fooT" is separated from the main body when it is turned
to the end of fastening groove.
18_ installation
<Separation> <Installation>