Samsung SVR-1670 User Manual page 29

Digital video recorder
Hide thumbs Also See for SVR-1670:
Table of Contents

Advertisement

Chapter 7. Communication To/From the DVR
Dynamic Host Confi guration Protocol (DHCP) manages host addresses on a
network. DHCP is used on a LAN with a DHCP server installed. If the LAN has a
DHCP
DHCP server and you have enabled this DHCP option, the DHCP server will allocate
an IP address to the DVR.
IP Address is used for communication between the DVR and SVM-S1, and is also
IP address
used when Web Viewer accesses the DVR. It is available only when Net Mask and
Gateway are set.
Net Mask specifi es a range of IP addresses and enables IP addresses in the range
Net Mask
to communicate. Net Mask should be allocated by a network administrator.
Gateway must be specifi ed to enable IP addresses to communicate and should be
Gateway
allocated by a network administrator.
DNS1 must be specifi ed to register the DVR to DDNS Server(www.samsungipolis.
DNS1
com) while DNS Address should be allocated by a network administrator.
Additional DNS
Additional DNS is used to replace DNS1 when it is unstable or has a problem.
Port used for connecting to SVM-S1 or Web Viewer. The default port number is
Port
4000.
Kbps sets the maximum transmission speed of data output from the DVR (the
Bandwidth Limit
data transmission capability of the DVR). This can be left blank. Ask your network
(Kbps)
administrator to specify it when necessary.
Setting up for xDSL
This section discusses the options available if your Network Type is xDSL.
Figure 7.1.2 Network Submenu for the Type xDSL (on the Network Setup Menu)
56
Digital Video Recorder
SVR-1670
Option
xDSL is the correct setting if the DVR is connected to a PPPoE-type xDSL line.
Type
(If the xDSL line is not of the PPPoE type, you must select Ethernet.)
ID
Enter your User ID.
Password
Enter your password.
Port is used to register to connect to SVM-S1 or to Web Viewer. The default port is
Port
4000.
This sets the maximum transmission speed of data output from the DVR (the
Bandwidth Limit
data transmission capability of the DVR). This can be left blank. Ask your network
(Kbps)
administrator to specify it when necessary.
Status
Displays the connection status of the DVR.
Digital Video Recorder
Setting
57
SVR-1670

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents