Chapter 4. Navigation: On-Screen Display And Function Menus; Working With The On-Screen Display - Samsung SVR-1670 User Manual

Chapter 4. Navigation: On-Screen Display and Function Menus

This chapter provides information about using the two graphical user interfaces for the Samsung
SVR -1670 DVR—the On-Screen Display and the Function menu.
The On-Screen Display (OSD) provides access to all SVR-1670 features and settings through a
series of menus, submenus and options.
The Function Key menu provides access to all SVR-1670 functions, such as operation of cameras
and manipulation of recorded video, through a main menu with icons.
You can access both the OSD and Function menu using the buttons on the SVR-1670 front panel,
the mouse, or by using the remote control device.
The information is presented in these sections :

4. 1 Working with the On-Screen Display

4. 2 Working with the Function Menu
Note on followings when using with mouse:
· Do not operate any other process until the mouse cursor appears when you connect a
mouse to the product.
· If the attached mouse is not operated for a long period, mouse may not work properly.
4. 1 Working with the On-Screen Display
You will use the OSD to set up, confi gure and operate the SVR-1670. The section discusses how to
work with the OSD and covers the following topics :
• Accessing the OSD
• Understanding the Menu Structure
• Using the On-Screen Keyboard
• Setting the Date and Time
• Saving Your Changes on the OSD
Accessing the OSD
To access the OSD, you can either :
· Press the MENU button on the front panel. To close it, press the ESC button.
· Press the Menu button on the remote control. To close it, press the ESC button.
· Press the "Home" icon on the Function menu. To close it, press the ESC button.
OSD Screen Elements
The OSD contains a row of tabs at the top with icons representing seven menus—Quick Setup,
Display, Record (HDD), Event, Communications, System Setup, and Exit.
38
Digital Video Recorder SVR-1670
Quick Setup Display Setup Record Setup Event Setup
Quick Setup Event Setup
Event
Record Mode
Program
Normal
Event Check
Preset
Language
D-I/O
Time
Audio Recording
Display Setup
Channel
Monitor1
SPOT
Record Setup
Record
Program
Figure 4.1.1 The On Screen Display
Each menu has a gray title bar with submenus, demonstrated in Figure 4.1.2 :
Submenu
Option
Figure 4.1.2 The OSD Menu Structure
Notice that on the submenu, options are listed on the left side of the screen, with settings to the
right.
As you work on the OSD you will quickly learn how to use your preferred method of moving from
menus, options and settings. This table gives you the basic instructions you need to know to get
started.
Digital Video Recorder
Network Setup System Setup Exit
Exit
Save
Do not save
Network Setup
Network
DDNS
NTP
Remote
IP Filter
System Setup
System
Disk
Password
Menu tab(Icon)
Setting
39
SVR-1670