Rack Installation - Samsung SRD-842 User Manual

RACK INSTALLATION

Install the Bracket-Rack as shown in the figure, and then fasten the
screws on both sides (2 screws on each side).
Fix the screws not to be loosened by vibrations.
`
Cautions when Installing in the Rack
To install multiple DVRs in the rack, make sure to separate the FOOT at the bottom of each DVR.
1. There are four FOOTs at the bottom of a DVR.
2. Remove the product's cover by pushing backward after
removing the screws on both sides and rear side.
3. Use a tool to remove the rubber on the foot holder.
4. "FOOT" is separated from the main body when you use
hand to push the holder of the foot.
English _15