Operating Status Display - Siemens HiPath 3000 Operating Instructions Manual

Icon Name
Left/Right
[
OK
Service menu

Operating status display

The following operating statuses are available:
Operating status
Off status
On or message status
Dial status
(after pressing the talk key
without entering the call
number)
Ringing status
(after entering the phone
number and pressing the talk
key)
Call status
Note:
The display language set by default is English. For information
on changing the language, please see pages 12 and 27.
Use
Select a function (dial or call status
only, see page 5)
Confirm selected function
Open the service menu (only during
a call in Hicom cordless EM V2.2 or
later, see page 43)
Display
Blank display – calls cannot be re-
ceived.
The user interface of the mobile tel-
ephone is displayed. The base
name is visible.
The user interface of the telephone
system is displayed. The telephone
system functions valid for the oper-
ating status are visible.
The user interface of the telephone
system is displayed. The telephone
system functions valid for the oper-
ating status are visible.
The user interface of the telephone
system is displayed. The telephone
system functions valid for the oper-
ating status are visible.
5