Operating In Walkie-Talkie Mode; Prerequisites; Activating And Deactivating - Siemens HiPath 3000 Operating Instructions Manual

The mobile telephone operating time is significantly reduced when
the room monitor function is activated.

Operating in walkie-talkie mode

This function allows you to operate mobile telephones outside the ra-
dio network.
Mobile telephones cannot be used for calls in walkie-talkie mode. The
range between the mobile telephones involved is max. 300 m. The
mobile telephone operating time is significantly reduced in this mode.

Prerequisites

• The mobile telephones used must be registered at the same base
and have selected this base.
or:
• The mobile telephones used must have set "Best Base".
Note:
All mobile telephones within range and at which walkie-talkie
mode is active and "Best Base" is set are called.
or:
• The mobile telephones used are not registered.
Note:
All mobile telephones within range and at which walkie-talkie
mode is active but are not registered are called.

Activating and deactivating

Please proceed as shown in the overview on page 34 to activate and
deactivate walkie-talkie mode.
35