Semi - Automatic Cooking - CDA RC 9621 Series Manual For Installation, Use And Maintenance

Semi - Automatic Cooking

This is used to switch the oven off automatically after the desired cooking time has elapsed.
There are two ways to set the semi-automatic cooking function:
1. Set the length of time you need to cook the food by pushing the
or to go backwards (Fig. 9).
This sets the desired "stop" time.
AUTO and the
or
2. Set the time you need the food to stop cooking by pushing the
to go backwards if you have passed the desired time (Fig. 10).
AUTO and the
Then set the temperature and the cooking program (see the relevant sections).
The oven is switched on and it will switch off automatically at the end of the desired time.
During cooking, the
until the end of the cooking.
The cooking program can be cancelled at any moment by pushing the
At the end of the cooking period, the oven and the
sound and can be stopped by pushing any of the buttons except the
Turn the function selector switch and thermostat knobs to zero and put the programmer onto "manual" by
pressing the button.
Attention: After a power cut the clock resets to zero and cancels the set programs. After a power cut, three
zeros will flash on the display.
Fig. 9
12
symbol will be on.
symbol will be on.
symbol remains on and by pressing the button
A
U
T
O
button and the
button and the
you can see the time that remains
symbol will disappear, AUTO will flash and a buzzer will
/ buttons.
A
U
T
O
Fig. 10
button to advance,
button to advance, or
button.