Table of Contents
Advertisement
ANTI-TILT BRACKET
Important!
To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear to fix it
securely to the wall.
To fit the anti-tilt bracket:
1.
After you have located where the cooker is to be positioned, mark on the wall the place where the two
screws of the anti-tilt bracket have to be fitted.
Please follow the indications given in fig. 38.
2.
Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied.
Important!
Before drilling the holes, check that you will not damage any pipes or electrical wires.
3.
Loosely attach the anti-tilt bracket with the two screws supplied.
4.
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in the slot
on the cooker's back, as shown in fig. 38.
5.
Tighten the screws attaching the anti-tilt bracket.
6.
Push the cooker against the wall so that the anti-tilt bracket is fully inserted in the slot on the cooker's
back.
Fig. 38
35
Advertisement
Table of Contents
