Notice To Users - Toshiba e-Studio 232 Operator's Manual

Notice to Users

After a suitable place has been selected for the installation of the e-STUDIO232/282, please do not
change it. Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as
the copier emits a small amount of ozone.
For EU only
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Working environment
This product and original electric accessories are designed to fulfill the EMC (Electromagnetic Compati-
bility) requirements for "commercial and light industry environments".
TOSHIBA TEC does not approve the use of this product in working environments other than "commer-
cial and light industry environments". As example, the following environments are not approved:
• Industrial Environments (e.g. environments where a mains voltage of 380 V three-phase is being
used).
• Medical Environments: This product is not certified as a medical product according to the Medical
Product Directive 93/42/EEC.
• Residential Environments (e.g. a private living room with TV / Radio sets in the nearby surrounding
area)
Any consequences resulting from the use of this product in working environments that are not approved
or the use is restricted are not the responsibility of TOSHIBA TEC.
The consequences of the use of this product in those working environments may be an electromagnetic
interference with other devices or machines in the nearby surrounding area.
This can result into malfunction including data loss / data error pertaining to this product or the other
devices / machines involved in the electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with explosive atmo-
spheres is not permitted.
1. Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2. Before opening any covers or removing any units from the copier, discharge the static electricity from
your body by touching a metal part of the copier.
CE compliance
This product is labelled with the CE mark in accordance with the provisions of the applicable European
Directives, notably the Low Voltage Directive 73/23/EEC and the Electromagnetic Compatibility Directive
89/336/EEC for this product and the electric accessories.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-
Schurz-Str. 7, 41460 Neuss, Germany, phone +49-(0)-2131-1245-0.
For a copy of the related CE Declaration of Conformity please contact your dealer or TOSHIBA TEC.
E-mail : customerservice@toshibatec-tgis.com.
For Germany only
Machine Noise Information
Ordinance 3. GPSGV: The maximum sound pressure level is equal or less than 70 dB(A) according to
EN ISO 7779
5