Toshiba e-Studio 232 Operator's Manual page 117

2-sided original -> 2-sided copy
• To use this function, you need to install the automatic duplexer (if not equipped).
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. (
2
Place the original(s).
3
Press the simplex/duplex button on the basic menu.
4
Press the [2 -> 2 DUPLEX] button.
• Set other copy modes as required.
5
Press the [START] button.
• When placing an original on the original glass, follow steps 5 to 6 of
glass" continuously.
P.71 "3.Bypass Copying")
P.65 "Placing an original on the original
3
115