Toshiba e-Studio 232 Operator's Manual page 26

1.Description of Each Component (Cont.)
9. Saddle Stitch Finisher (MJ-1025)
1
This finisher enables saddle stitching, in addition to sort/group finishing and stapling. (The Hole Punch
Unit sold separately can be installed to this finisher.) The Bridge Unit (KN-3520 sold separately) is
required when installing this finisher.
10. Hanging Finisher (MJ-1022)
This finisher enables sort/group finishing and stapling. The Bridge Unit (KN-3520 sold separately) is
required when installing this finisher.
11. Hole Punch Unit (MJ-6005)
This unit enables you to punch holes on printouts. It can be installed to the Saddle Stitch Finisher (MJ-
1025).
12. Automatic Duplexer
Enables duplex copying.
The Automatic Duplexer may be optional.
Other options available are as follows. Contact your service technician or Toshiba product distributors for
details. (Options may vary depending on destination.)
Work Table (KK-3511)
FAX Unit (GD-1150)
2nd Line for Fax Unit (GD-1160)
Desk (MH-1700)
Data Overwrite Kit (GP-1060)
Scrambler Board (GP-1040)
Wireless LAN Module (GN-1041)
Bluetooth Module (GN-2010)
Antenna (GN-3010)
Printer Kit (GM-1070)
Printer/Scanner Kit (GM-2070)
Scanner Kit (GM-4070)
24
1.BEFORE USING EQUIPMENT