Toshiba e-Studio 232 Operator's Manual page 312

7."Check paper size setting on control panel for drawer N" (Cont.)
7
Press the drawer button corresponding to the one mentioned in the
message on the touch panel.
8
Press the paper size button corresponding to the one placed in the
drawer.
P.43 "4.Setting Copy Paper"
9
Place the removed paper and the original, and then try to copy again.
10
During copying (using the bypass tray)
1
Turn the power of the equipment OFF.
• You cannot shut down the equipment.
2
Remove the jammed paper.
P.274 "4.Jam Symbols"
310
10.WHEN THIS MESSAGE APPEARS