Shutdown; The Control Panel - Toshiba e-Studio 232 Operator's Manual

Shutdown

Be sure to shut down the equipment following the procedure below. Do not turn the power off by pressing
the power switch, otherwise the hard disk may be damaged. Be sure to confirm the following three points
before shutdown.
• No jobs should be left in the print job list. (
• None of the PRINT DATA, MEMORY RX and FAX communication lamps should be blinking. (If the
equipment is shut down while any of the above lamps is blinking, jobs in progress such as FAX recep-
tion will be aborted.)
• No PC should access the equipment via the network.
1
Press the [USER FUNCTIONS] button on

the control panel.

2
Press the [USER] button on the touch panel to enter the user setting
menu, and then press the [SHUTDOWN] button.
3
"Processing job will be deleted. Are you sure you want to shutdown?"
appears on the menu. Press the [YES] button.
• To cancel the shutdown operation, press the [NO] button.
P.228 "1.Job Status")
1
39