E-Studio232/282 Specifications - Toshiba e-Studio 232 Operator's Manual

1. e-STUDIO232/282 Specifications

Model name
Type
Original glass
Printing (copying) system
Developing system
Fixing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Resolution
Acceptable originals
Acceptable original size
Acceptable copy
paper size
Acceptable copy
paper weight
Warm-up time
First copy time
Continuous copy speed
Multiple copying
Excluded image
width
12
Reproduction ratio
Paper supply
Toner density adjustment
Exposure control
Environment (for normal use)
326
12.SPECIFICATIONS & OPTIONS
DP-2340/2840
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
Halogen lamp (2 pieces)
OPC
Flat surface scanning system
(When the reversing automatic document feeder is installed: Fixed
scanning system by feeding the original)
Linear CCD sensor
Xenon lamp
Scanning 600 dpi x 600 dpi
Writing 2,400 dpi (equiv) x 600 dpi (Smoothing process)
Sheets, books and 3-dimensional objects
Max. A3
Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13" LG, 8.5" SQ, 8K, 16K, 16K-R
Bypass Paper size within 100-297 mm (Length), 148-432 mm (Width)
Drawer
64-105 g/m
Bypass
64-209 g/m
50-209 g/m
64-105 g/m
Approx. 25 seconds
5.4 seconds max.
See "Continuous Copying Speed".
Up to 999 copies (digital key entry)
Copy Leading edge: 3.0±2.0 mm, Trailing edge: 2.0±2.0 mm,
Both edge: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 5.0±2.0 mm
Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the reversing document feeder 25-200% (in 1% increments)
Drawer
550 sheets (80 g/m
Bypass
100 sheets (80 g/m
Magnetic auto-toner system
Automatic plus manual selection from 11 exposure step
Temperature: 10 - 30 ºC, Humidity: 20 - 80% (No Condensation)
2
2
(for continuous feed)
2
(for single feed)
2
(When the reversing automatic duplexer is used.)
2
)
2
)