System Board - HP 10 Maintenance And Service Manual

Table of Contents

Advertisement

System board

Description
System board equipped with a Broadcom Cortex A9 dual core 1.20-GHz processor, 1.0-GB LP
DDR2 system memory, an 8.0-GB eMMC solid-state drive, a graphics subsystem with UMA
memory, and the Android 4.1.2 operating system (includes vibrator module and cable)
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the speaker cable from the system board (see
6.
Remove the rear-facing webcamera (see
Back cover on page
12).
Rear-facing webcamera on page
Spare part number
746636-001
Battery on page
14).
22).
System board
19

Advertisement

Table of Contents
loading

Table of Contents