Table of Contents
Advertisement
Battery
Description
Battery, 4600-mAhr, Li-ion, (includes cable)
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
information. To prevent loss of information, save your work or shut down the tablet through Windows
before removing the battery.
Remove the battery:
1.
Disconnect the battery cable (1) from the system board.
2.
Release the zero insertion force (ZIF) connector (2) to which the display panel cable is connected,
and then disconnect the display panel cable from the system board.
3.
Release the ZIF connector (3) to which the I/O board cable is connected, and then disconnect the
I/O board cable from the system board.
4.
Remove the six Phillips PM2.0×2.75 screws (1) that secure the battery to the display
panel assembly.
5.
Lift the front edge of the battery (2) until it rests at an angle.
14
Chapter 5 Removal and replacement procedures
Back cover on page
To reduce potential safety issues, use only the battery provided with the tablet, a
Removing a battery that is the sole power source for the tablet can cause loss of
12).
Spare part number
739002-001
Advertisement
Table of Contents
