Replacing The Feed Gap Sensor Ass'y And Label Guide - Toshiba B-SV4T SERIES Manual

3.7 Replacing the Feed Gap Sensor Ass'y and Label Guide

1. Please refer to 3.1 for disassembling the lower cover ass'y and lower inner
cover.
2. Disconnect all harnesses from the main PCB ass'y .
3. Turn the lower inner cover upside down.
4. Screws off 4 screws and remove the plastic laminate.
Plastic Laminate
Screws
5. Screws off 2 screws from a Label Guide Rack Fixing Plate and 2 from a gap
sensor PCB then remove the feed gap sensor ass'y.
Screw
Label Guide
Rack Fixing
Plate
Screw
Screws
Lower Inner Cover
3-10
Feed Gap Sensor Ass'y
Screw