Replacing The Lower Inner Cover - Toshiba B-SV4T SERIES Manual

3.2 Replacing the Lower Inner Cover

1. Refer to 3.1 to remove the top cover ass'y.
2. Remove the 6 screws on lower inner cover. Turn the printer upside down,
remove the 2 screws of hinge holder, and 1 screw of memory module cover.
Screw of
hinge holder
Screws
3. Disconnect all harnesses from Main PCB ass'y. Lift up the lower inner cover.
4. Replace the lower inner cover.
5. Reassemble in reverse procedures.
Lower inner cover
3-4
Screw of
hinge holder
Screws
Screw
Memory module
cover