Installing The Mounting Plate; Installing The Light Kit - HAMPTON BAY 132 cm Fan User Manual

8. Installing the
mounting plate
Step 1. Remove 1 of 3 screws from the mounting
ring and loosen the other 2 screws. (Do not
remove)
Step 2. Place the mounting plate key holes
over the 2 screws previously loosened from the
mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 16).
Mounting ring
Mounting plate
Figure 16
9. Installing the light
Kit
NOTE: Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at
fuse box.
1. Remove 1 of 3 screws from the mounting
plate and loosen the other 2 screws. (Do
not remove)
2. Raise and hold the l
mounting plate and proceed to do the
wire connections. Connect the white wire
connectors from the light kit and fan,
follow the same procedure with the black
wire connectors. (Fig. 17)
3. Place the l
screws previously loosened from the
mounting plate, turn l
locks in place at the narrow section of the
key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed.
Screws
ight kit
close to the
ight kit key holes over the 2
ight kit until it
Connection plug
Light kit
Figure 17
Mounting plate
Screws