Table of Contents
Advertisement
6.1.5 Motion Detection
Click motion detention button, the image is shown as in figure 6-7.
This function gets activated except scheduled time period.
You can click you mouse in the detection region to set motion detection area. The
blue area is the motion detection zone.
• Channel: here is for you to select channel number.
• Delay time: system delays specified time you have set after alarm is cancelled.
• Sensitivity: here you can set area sensitivity.
• State: there are two modes: on/off.
Note:
This function is nor available in current version.
6.1.6 Alarm
Click alarm button you can see an image is shown as in figure 6-8.
• Record channel：You can draw a √ in the check box to activate this function.
• Record Channel：You can draw a √ in the check box to activate this function.
• Time：You can set two periods here.
• Mail Send：You can draw a √ in the check box to activate this function.
6-7
45
Advertisement
Table of Contents
