Table of Contents
Advertisement
6.1.3 Scheduled
Click scheduled, the image is shown as below. See figure 6-5.
Here is for you to set record information.
There are three record modes: record, dynamic and alarm. You can draw a √ in
the corresponding check box.,
Please click save button after all the setup.
Note:
All the video files here are saved in server; you need to install central
management software first.
The start time should earlier than the end time.
6.1.4
Image
In figure 6-1 click image button, the following dialogue box pops up. See figure 6-6.
Here you can set image information and view network protocol.
Click <save> below "time display" to save a configuration for one channel.
After all the setup please click <save> in the bottom to save all settings.
• FPS：PAL:1/2/3/6/12/25；NTSC: 1/2/4/7/15/30.
• Video Type：Only MPEG4 is available.
6-5
43
Advertisement
Table of Contents
