6.1.1.2 Load configuration
You can click load configuration button in figure 6-1 to load you previously backup
file. See figure 6-3.Click Ok button and then select file of extension name .CFG. Now
you have updated system setup.
6.1.2 General
In figure 6-1, click general button. You can see an image is shown as in figure 6-4.
Here is for you to input network information and select corresponding protocol.
Note:
Improper network setup will trigger error dialogue box!
System will reboot and prompt you to login again after successful IP modification!
6-3
6-4
42