Table of Contents
Advertisement
（3）Auto flip
As long as you continue to hold the joystick in the down position, the dome rotates
180 degrees and repositions itself for uninterrupted viewing of any subjects that
passes directly beneath the dome.
（4）3D auto location
Working with DVR, click SIT button and then click one point in scene, current screen
will be displayed in the central window. Drag mouse move down is to zoom in; drag
mouse move up is to zoom out. The smaller the zone size, the bigger the zoom
amount. All of these allow you to trace fast.
(5) Parameter setup
Click parameter setup button in figure 5-8. The image is shown as below. See figure
5-9.
Here you can select the following four items:
Preset
Auto scan
Auto tour
Pattern.
(6) Page change
In figure 5-8 click page change button, the image is shown as below. See figure 5-
10.
No. column here is for you to input corresponding values.
Click page change again, system goes back to figure 5-8.
5-9
35
Advertisement
Table of Contents
