1. Manuals
  2. Brands
  3. Videovox Pro Manuals
  4. Security Camera
  5. C08
  6. Operating manual

Videovox Pro C08 Operating Manual

Network speed dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C08 & C09
Network Speed Dome
Operating Manual

Advertisement

Table of Contents
loading

Summary of Contents for Videovox Pro C08

  • Page 1 C08 & C09 Network Speed Dome Operating Manual...

  • Page 2: Table Of Contents

    Content Welcome .............................. 1 Important Safeguards and Warnings ....................2 Features and Functions ......................3 Functions ........................3 1.1.1 Network Management ................... 3 1.1.2 User Management ....................3 1.1.3 Proportional Pan and Tilt ..................3 1.1.4 Preset ........................3 1.1.5 Auto Scan ........................ 3 1.1.6 Auto Touring ......................
  • Page 3 Network Speed Dome Installation Dimension ............13 DH Network Speed Dome Bracket Installation ..............14 Important Safeguard and Warnings ................. 14 Please Refer to Concerning Manual for Repair Operation........14 Check accessories ...................... 14 Installation and Service after Sales ................14 Maintenance ........................
  • Page 4 5.3.4 PTZ Control ......................34 Camera setting ......................36 5.4.1 Zoom ........................36 5.4.2 Focus ........................36 5.4.3 Iris ........................... 37 5.4.4 Preset ........................37 Auto tour ........................37 Auto scan ........................38 Auto pattern ......................... 38 PTZ Alarm input and output setup ................39 Call assistant function ....................

  • Page 5: Welcome

    Welcome Thank you for purchasing our network speed dome system! This operating manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this speed dome features and functions. Before installation and operation please read the following safeguards and warnings carefully!

  • Page 6: Important Safeguards And Warnings

    Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2．Transportation security No heavy stress, violent vibration or water splash are allowed during transportation, storage and installation.

  • Page 7: Features And Functions

    1 Features and Functions 1.1 Functions This series network speed dome has the following functions: 1.1.1 Network Management This series speed dome supports IE browser to realize network management. You can implement speed dome functions via IE. Besides, its most advantage is to realize simple operation and management via a network cable without much peripheral equipment.

  • Page 8: Storage

    1.1.10 Storage System can backup the concerning video to the central storage server via alarm or scheduled setting as you have set. You can record in local PC and backup the video to the client PC. 1.1.11 Day and Night Mode Auto/manual switches in low illumination .In auto mode camera will automatically adjust CCD light level.

  • Page 9: High Sensitive, High Resolution Integrated Digital Color Camera

    Delicate engine drive. Support 360 º continuous pan rotation. No blind area. Support 0.1º /s pan rotate while maintain image stability 180 º continuous tilt surveillance. 1.2.4 High Sensitive, High Resolution Integrated Digital Color Camera Auto focus Auto backlight compensation Auto light control Auto white balance Auto day/night mode...
  • Page 10 Network Control Mode 1200/2400/4800/9600 (Optional) Baud Rate 0.06 ± 0.015º PTZ Scan Accuracy > 50dB S/N Ratio 752（H）× 582（V） Effective Pixel 480TVL Horizontal Resolution Auto/Manual (Default mode: auto) Fan and Heater ＜90% Humidity -30 —55 （Outdoor. Pre-heat needed） -10 —50 Environment （Indoor）...

  • Page 11: Network Speed Dome Installation

    2 Network Speed Dome Installation 2.1 Safeguarding and Warnings Before installation and operation, please read the following safety warnings carefully! All the installation here should be done by the qualified service engineer. All the operation here should conform to your local electrical safety code. The indoor series dome shall not be installed in wet or moisture environment.

  • Page 12: Network Speed Dome Package

    2.3 Network Speed Dome Package 2.4 Bracket We provide various installation brackets and installation ways for indoor and outdoor pendent network speed dome. DH—FB1 DH—FB2 Wall mount bracket Wall mount bracket （with 24V/3A power box） 1. Corner mount bracket DH-FW corner mount bracket×1 DH-FB wall mount bracket×1(Optional) Gasket×1 Other installation fittings...

  • Page 13: In-Ceiling Network Speed Dome Installation

    3. Wall surface mount bracket DH-FM wall surface mount bracket×1 DH-FB wall mount bracket×1 Gasket×1 Other installation kit DH—FM Wall surface mount 4. Pendant mount bracket DH—FD DH-FD pendant fixed chassis×1 Pendant bracket DH-FD200/500/800/1000 pendant bracket×1 （200mm /500mm/800mm/1000mm） DH-FD stud×1 Gasket×1 Other installation kit DH—FD...
  • Page 14 Open the hinged door to the back box. Pull power cable, video cable, RS485 cable, network cable through cable feed out of the conduit fittings. Connect them with PCB board. Close the hinged door and screw the bolts. Pushing the back box into the installation hole (you just cut in step 1) by compressing the tab lock.

  • Page 15: Pendant Network Speed Dome Installation

    Step 4 Install lower dome. Match the two grooves of the lower dome with the two black tab locks. Insert one side while pressing the other side. Continue pushing on the ends until you hear a click noise. 2.6 Pendant Network Speed Dome Installation Step 1 Network speed dome back box installation For outdoor installation series domes, please make sure the dome has sound...
  • Page 16 A; Pull the power cable, video B; Loosen the screws and then cable, RS485 and network cable open the hinged box. through wall mount bracket hole. C; Pull the power cable, video D; Refer to the above figure, use cable, RS485 and network cable bolts to connect bracket and the through back box feed through back box.

  • Page 17: Network Speed Dome Installation Dimension

    Note: Please make sure the clips on both sides are firmly fixed. You can follow the tab on the outside cover to check. Step 4 a. Install transparent cover Insert the silica gel ring into the pressured groove of the lower dome. b.

  • Page 18: Dh Network Speed Dome Bracket Installation

    3 DH Network Speed Dome Bracket Installation 3.1 Important Safeguard and Warnings All the installation here should be done by the qualified service engineer. All the operation here should conform to local electrical safety code. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.

  • Page 19: Dh-Fb Wall Mount Bracket

    When you need to return network speed dome for repair job, please get the repair number first and ship the product to the factory in accordance with transportation safety code. We assume no liability for all the damages result from improper package during transportation.
  • Page 20 2. DH-FW exterior corner bracket It works with wall mount bracket for corner installation. 3. DH-FB wall mount bracket fittings Step1－Dig holes in the wall Dig four holes in the wall in accordance with corner bracket holes and then insert φ expansion bolts into the hole (not supplied).
  • Page 21 Step 2－Corner bracket installation Connect power cable, video signal cable, control cable and network cable through the corner bracket hole. Insert corner bracket holes into the four expansion blots and use screw cap and gasket to fasten firmly. Wipe glass glue (not supplied) in the string hole to enhance waterproof capability. (Please make sure the cable is long enough to pull through the hole) Step 3－Fitting installation Screw four hex bolts through corner mount bracket and plastic gasket into wall...
  • Page 22 Step 4－ Network Speed Dome installation Open the dome hinged box and connect cables into the dome. Please refer to chapter two for network speed dome installation. Please check all the following fittings are included in the package, contact your local retailer immediately if something is missing.
  • Page 23 3. DH-FB wall mount bracket fittings Step 1－ Dig holes in the wall Dig four holes in the wall in accordance with corner mount bracket hole and insert φ expansion bolts (not supplied) into the hole. Step 2－ Corner mount bracket installation Connect power cable, video signal cable, control cable and network cable through the corner bracket hole.
  • Page 24 Step 3－Fitting installation Screw four hex bolts through wall mount bracket and plastic gasket into wall surface mount bracket. (Between screw and bracket, please add a spring gasket). Fasten the wall bracket firmly mount the corner bracket. Note: when screw bolts, please fasten the spring gasket and then turn half a circle. In this way, you can fasten plastic gasket to get sound airproof ability and at the same time to avoid screw damage.
  • Page 25 2. DH-FQ pole mount bracket It works with wall mount bracket for pole mount installation. It works with pole mount bracket and diameter is adjustable. There are seven dimensions for you. Φ59 - 82mm, Φ84 -108mm Φ103 -127mm, Φ130 -152mm Φ155 -178mm, Φ180 -203mm Φ194 -216mm We also supply customized dimensions.
  • Page 26 Step 2－Corner bracket installation Connect control cable, video cable, power cable and network cable through the bracket centre hole. Get the three straps to fasten the column object and screw the bolts firmly. Wipe glass glue (not supplied) at the string holes to enhance waterproof ability.
  • Page 27 1. DH-FD pendant bracket chassis（with string groove） It is suitable for pendant back box installation. It works with pendant bracket. 2. DH-FD200/300/500 connection rod DH-FD200 length 200mm；DH-FD300 length 300mm；DH-FD500 length 500mm， Pendant bracket should work with pendant fixed chassis. (Standard configuration)
  • Page 28 3. DH-FD suspended bracket fittings Set screw Sealed rubber ring Sealed plastic pad Step 1－Dig four holes in the wall Draw four Φ6 holes (not supplied) in the wall in accordance with holes of fixed chassis and then insert Φ6 expansion bolts into the holes. Step 2－Pendant bracket connection chassis installation Connect control cable, video cable, power cable and network cable through the chassis centre hole.
  • Page 29 Connect the cables through the bracket centre, and circle the pendant bracket into the fixed chassis. Use one slot to fasten the screw firmly. Note: please add anaerobic adhesive to the screw for outdoor use. Step 4－Network dome installation Open the dome hinged box and connection cables into the dome. Please refer to chapter two for network speed dome installation.

  • Page 30: Network Keyboard Control Dome

    4 Network keyboard control dome Note: all the operations here are based on DH-SD protocol. You can refer to Chapter eight for PELCO protocol operation. 4.1 Dome and Network Keyboard Connection Connect dome A cable with Pin 3 or Pin 7 of Keyboard 485 interface. Connect dome B cable with Pin 8 or Pin 9 of Keyboard 485 Port.

  • Page 31: Network Keyboard Operation

    Enter MENU dome menu Move ↑ cursor Move ↓ cursor down ON/OFF ← or → or select other function Enter ENTER menu Exit sub Highlight BACK and then click menu ENTER in keyboard. • Click ESC in the keyboard. Exit dome •...

  • Page 32: Direction Setup

    • All the operations here are based on DH_SD protocol. 4.4.1 Direction Setup 4.4.1.1 Speed It is to control direction. The value ranges from one to eight. Speed：5 Please use the number buttons of the keyboard to input 〈Zoom〉 value (between 0~8) and press ENTER to confirm. 〈Direction〉...

  • Page 33: Tour

    Note: for versatile scan and random scan, you need Corresponding protocols to support. 4.4.4 Tour 4.4.4.1 Tour setup Use up/down keys to highlight add to tour. Input value in tour Tour group. ＞ Tour group：1 Tour setup For example, here we want to add tour point 2 and 3 in tour Add to tour Tour：...

  • Page 34: Pattern

    4.4.5 PATTERN 4.4.5.1 Pattern setup • Move cursor to highlight pattern and then input pattern Pattern Value：1 value. Input value is the pattern path you want to set Patter setup ＞ Start (Maximally support five paths). Click ENTER to confirm. Rotation Stop •...

  • Page 35: Web Client Operation

    5 Web client operation 5.1 Network connection Before web client operation, please check the following items: Network speed dome network connection is right DVR and PC network setup is right. Please refer to general-system setting- network setup Use order ping ***.***.***.***(* network dome IP address) to check connection is OK or not.

  • Page 36: Before Login

    5.2.1 Before login Before login, right click mouse, you can see an image is shown as in figure 5-3. 5.2.2 After login Click login the following image will pop up. See figure 5-4.Please input your user name and password. Note: Default account is: user name: admin: password: admin.

  • Page 37: Real-Time Surveillance

    When you are in surveillance mode, right click mouse the image is shown as in figure 5-6. You can see there added a new item: Pan-tilt control. Real time surveillance: choose the channel you want to implement real time monitor. Decode quality: there are totally four levels: general, good, better and best.

  • Page 38: Ptz Control

    2: Stop 3: Snapshot 4: Slow replay 5: Play 6: Pause 7: Fast play 8: Full screen 5.3.4 PTZ Control In figure 5-6, select pan-tilt control, the image is shown as in figure 5-8. SIT is 3D positioning button. Around SIT are eight PTZ directions keys.
  • Page 39 （3）Auto flip As long as you continue to hold the joystick in the down position, the dome rotates 180 degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome. （4）3D auto location Working with DVR, click SIT button and then click one point in scene, current screen will be displayed in the central window.

  • Page 40: Camera Setting

    5-10 (7) Speed setup Network speed dome is to control direction operation. There are eight levels ranging from 1 to 8. Level 8 is the fastest speed. See figure 5-11. 5-11 5.4 Camera setting Here is for you to control network speed dome camera. 5.4.1 Zoom In figure 5-8, click buttons beside zoom to adjust focus.

  • Page 41: Iris

    5.4.3 Iris Iris is to adjust camera image brightness. Click right button near iris screen becomes brighter while click left button near iris the screen becomes darker. You can use these two buttons to get ideal Iris is in auto mode after initialization, dome pan or tilt movement or zoom in, zoom out.

  • Page 42: Auto Scan

    5.6 Auto scan Auto scan function allows camera to scan back and forth regularly in a horizontal field. Here you need to set left and right limit and scan speed. System support five scan route. Move PTZ to your start location and then click “left limit”...

  • Page 43: Ptz Alarm Input And Output Setup

    5.8 PTZ Alarm input and output setup In the main window, click configuration button and then click alarm button. You can see the image is shown as below. See figure 5-16. 5-16 In figure 5-16, click Alarm PTZ button. You can see PTZ alarm setup interface. See figure 5-17.System supports two alarm input ports.

  • Page 44: Call Assistant Function

    5.9 Call assistant function You can refer the following sheet for assistant function. Assistant Open Close Assistant Open Close button NO. button Open Close Open Close backlight backlight digital digital zoom compensation compensation zoom Close Open Increase Decrease Day/Night Day/Night shutter time shutter time mode...

  • Page 45: Other Functions In Web Menu (Configuration/Assistant)

    6 Other Functions in Web Menu (Configuration/Assistant) 6.1 Configuration In web menu, click configuration button the image is shown as in figure 6-1. There are totally seven function keys. 6.1.1 Load and save configuration 6.1.1.1 Save configuration Click save configuration button in figure 6-1.You can save current configuration to a file.

  • Page 46: General

    6.1.1.2 Load configuration You can click load configuration button in figure 6-1 to load you previously backup file. See figure 6-3.Click Ok button and then select file of extension name .CFG. Now you have updated system setup. 6.1.2 General In figure 6-1, click general button. You can see an image is shown as in figure 6-4. Here is for you to input network information and select corresponding protocol.

  • Page 47: Scheduled

    6.1.3 Scheduled Click scheduled, the image is shown as below. See figure 6-5. Here is for you to set record information. There are three record modes: record, dynamic and alarm. You can draw a √ in the corresponding check box., Please click save button after all the setup.
  • Page 48 • Quality: There are six levels ranging from 1to 6. 6-level is the best image quality, but the largest data flux. • Resolution：HD1/CIF/QCIF/VGA / QVGA. • Style： CBR: constant bit rate, bit rate is based on other parameters setting, for example FPS, image quality, size etc. See details in appendix, on the last page.

  • Page 49: Motion Detection

    6.1.5 Motion Detection Click motion detention button, the image is shown as in figure 6-7. This function gets activated except scheduled time period. You can click you mouse in the detection region to set motion detection area. The blue area is the motion detection zone. •...

  • Page 50: Video Setup

    When you finish all the setup here please clicks “save” in the bottom to save all configurations. 6.1.7 Video setup Here is for you to select hue, contrast, brightness and saturation for each channel (or all channels). You can also open or close audio. See figure 6-9.

  • Page 51: Network Setup

    6.1.8 Network Setup Click network button, the image is shown as in figure 6-10. 6.1.8.1 PPPoE Connection Set PPPOE as on, and then please input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider). After saving it, you need to restart to active your configuration. After rebooting, network speed dome will connect to internet automatically.

  • Page 52: Assistant

    In network DDNS, input your PPPoE name you get from you IPS and server IP (PC with DDNS). Click save and then reboot system. Click save button, system prompts for rebooting to get all setup activated. After rebooting, open IE and input as below: http：//(DDNS server IP)/(virtual directory name)/webtest.htm e.g.: http：//10.6.2.85/network speed dome_DDNS/webtest.htm.) Now you can open DDNS Server web search page.

  • Page 53: Change Language

    6-11 6.2.2 Change language System can switch between simplified Chinese and English. System needs to reboot before modification becomes activated. 6.2.3 User manage Click user manage button, the image is shown as below. See figure 6-12. 6-12 6.2.3.1 Add user Click add user button, the image is shown as below.
  • Page 54 6-13 6.2.3.2 Modify user Modify user dialogue box is similar to Figure 6-13. You can modify user information and then click save button to return. 6.2.3.3 Delete user Click delete user button, system pops up the following dialogue box asking you to confirm.

  • Page 55: Record Control

    6-16 6.2.3.5 Delete group Click delete group button, system pops up dialogue box asking you to confirm. Click Ok to delete selected group. Note: you can only delete empty group (no user in the current group) 6.2.3.6 Modify group Click modify group, system pops up the dialogue box for you to modify rights setup. Please note when you delete one right for whole group, you need to make sure no user in current group has that right! 6.2.4 Record control...

  • Page 56: Date Time

    6-18 6.2.6 Date Time Here is for you to modify equipment time and date. See figure 6-19. Note: You need proper right to modify these items since time is very important factor in system. 6-19 6.2.7 System Information Here you can view current network speed dome running status. See figure 6-20.

  • Page 57: Alarm Prompt

    6-20 6.2.8 Alarm prompt Here you can select audio file and type. You can draw a √ before the check box. See figure 6-21. 6-21 6.2.9 Channel name Here is for you to modify channel name. System only supports maximally 8 Chinese characters or 16 English characters/numerals.

  • Page 58: Upgrade Bios

    6-22 6.2.10 Upgrade BIOS Before upgrading, you can get upgrade file from our local engineer or download from our website. During upgrade process, power failure will terminate the whole upgrade process! In figure 6-23 click open file, select the directory and click send data button, system automatically begin upgrading BIOS.

  • Page 59: Record Directory

    6-24 6.2.11.1 Email server IP address In figure 6-24, select server IP and then click add button. System pops up the following dialogue box. See figure 6-25.You can input server network information here. 6-25 6.2.11.2 Receiver email address You can set one to three email addresses. System can send the email to you specified addresses.
  • Page 60 Privacy mask zone is a four-sided section in the screen. You can drag this section to your desired location and resize its size. Draw a √ before the checkbox to activate this function. See figure 6-28. 6-28 6.2.15 About Here is for you to view version information, program version (BIOS version) and etc. See figure 6-29.

This manual is also suitable for:

C09

Table of Contents