Table of Contents
Advertisement
3. DH-FB wall mount bracket fittings
Step 1－
Dig holes in the wall
Dig four holes in the wall in accordance with corner mount bracket hole and insert φ
expansion bolts (not supplied) into the hole.
Step 2－
Corner mount bracket installation
Connect power cable, video signal cable, control cable and network cable through
the corner bracket hole. Insert corner bracket holes into the four expansion blots and
use screw cap and gasket to fasten firmly.
Wipe glass glue (not supplied) in the string hole to enhance waterproof capability.
(Please make sure the cable is long enough to pull through the hole)
19
Advertisement
Table of Contents
