Camera Setting; Zoom; Focus - Videovox Pro C08 Operating Manual

(7) Speed setup
Network speed dome is to control direction operation. There are eight levels ranging
from 1 to 8. Level 8 is the fastest speed. See figure 5-11.

5.4 Camera setting

Here is for you to control network speed dome camera.

5.4.1 Zoom

In figure 5-8, click buttons beside zoom to adjust focus. Left button is to zoom out
and the right button is to zoom in.
5.4.2

Focus

Focus is a process to adjust the object or scene definition. Click right button beside
the focus, the object faraway becomes clear. Click left button beside the focus,
object near you becomes clear. You can use these two buttons to get a vivid scene.
Please note focus is in auto mode after initialization, dome pan or tilt movement or
zoom in, zoom out.
In the following environment, camera can not auto focus the object.
Object is not in the centre
Camera can not review clear objects faraway and near at the same time.
Object is of strong light such as neon light or spotlight.
Fast moving object
Wide area, flat objects such as wall.
Object is too dark or blur.
5-10
5-11
36