Videovox Pro C08 Operating Manual page 26

Step 2－Corner bracket installation
Connect control cable, video cable, power cable and network cable through the
bracket centre hole. Get the three straps to fasten the column object and screw the
bolts firmly. Wipe glass glue (not supplied) at the string holes to enhance waterproof
ability.
Step 3－Fitting installation
Screw four hex bolts through wall mount bracket and plastic gasket into pole mount
bracket. (Between screw and bracket, please add a spring gasket). Fasten the wall
mount bracket firmly on the pole mount bracket.
Note: when screw bolts, please fasten the spring gasket and then turn half a circle.
In this way, you can fasten plastic gasket to get sound airproof ability and at the
same time to avoid screw damage.
Step 3
Spring
Hex Bolts
Step 4－Dome installation
Step 4- Dome Installation
Open the dome hinged box and connect cables into the dome. Please refer to
chapter two for network speed dome installation.
Please make sure all the following fittings are included in the package, contact you
local retailer immediately if something is missing.
22