Table of Contents
Advertisement
3. DH-FD suspended bracket fittings
Set screw
Sealed rubber ring
Sealed plastic pad
Step 1－Dig four holes in the wall
Draw four Φ6 holes (not supplied) in the wall in accordance with holes of fixed
chassis and then insert Φ6 expansion bolts into the holes.
Step 2－Pendant bracket connection chassis installation
Connect control cable, video cable, power cable and network cable through the
chassis centre hole. Fasten rubber pad on the suspended chassis. Insert the chassis
four holes into expansion bolts and use screw cap and gasket to fix firmly. Wipe
glass glue (not supplied) at the string holes to enhance waterproof ability.
Note: please make sure the cable is long enough to pull through the hole.
Step 3－Suspended bracket installation
24
Advertisement
Table of Contents
