Table of Contents
Advertisement
5.6 Auto scan
Auto scan function allows camera to scan back and forth regularly in a horizontal
field. Here you need to set left and right limit and scan speed. System support five
scan route.
5-14
5.7 Auto pattern
This series network speed dome can memorize user PTZ manual operation, focus
zoom in/out, speed and etc. The dome begins moving from the start point to the end
point as pre-specified. One operation can last for maximum two minutes. Focus and
iris are in auto mode during auto pattern process.
5-15
Move PTZ to your start location and then click "left
limit" button in figure 5-14.
Move PTZ to your stop location and then click "right
limit" button in figure 5-14.
Now you have finished one scan setup.
In figure 5-12, click auto scan button, system begins
auto scan process.
Select mode in PTZ movement options.
Click start button in figure 5-15, you can move
PTZ and implement camera operations.
After all the operations, click stop button in
figure 5-15. Now you have set one pattern.
In figure 5-12, click auto pattern button, system
begins auto pattern process.
38
Advertisement
Table of Contents
