Table of Contents
Advertisement
9 PC communication setting
Connect the balance to PC with proper cable (pag. 35)
1. From zero display condition press and keep pressed the MENU button until the
acoustic alarm is over, and then release the button. It will be displayed the string
"unitS", then press the MENU button until it is displayed "PC-PRTR" message then
confirm by pressing PRINT button.
2. Press
MENU
button
until
"PC
cont"
displayed to choose continuous print or "PC CMd" to choose print to PC at user
command, and then press the PRINT button to confirm the choice.
6. After having selected the desired transmission mode, press the MENU button to
go to next parameter or the CAL button to go to previous.
7. To escape from parameters setup menu, press the MENU button until the
acoustic alarm is over, then release the button. The balance returns to normal
weighing conditions.
8. The balance returns to normal weighing conditions sending the data
continuously or at user command.
NOTE: select speed transmission (pag. 21)
21
the
the
is
Advertisement
Table of Contents
