Intelligent PH Series User's Operation Manual page 38

7. It is now asked to weigh the glass float in air, confirm this with PRINT
8. Now
perform a tare if necessary and put the glass float to the weighing hook. Press then
the PRINT button to acquire the value. During the acquisition of the value the
message WEI AIR will be flashing.
9. It is now asked to weigh the glass float immersed into the liquid. Perform a tare if
necessary and immerse the glass float into the liquid. Press the PRINT button.
During
the
acquisition of the value the message WEI LIq will be flashing.
10. The result of the density of the liquid is now displayed. Pressing the PRINT button it is
possible to print the value of density, if the balance is equipped with a printer.
11. In case of error the following message is displayed
12. Press the ON/OFF button to escape from density function, or the MENU button to
perform another measurement.
38