Proper Care & Cleaning - Glacial 8LDIECH-SC-WFC-SSF User Manual

PROPER CARE & CLEANING
General Cleaning
Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
1. Clean cabinet surfaces with a soft cloth and warm soapy water.
2. Wipe dust from back of dispenser to improve efficiency.
3. Remove drip tray assembly by sliding it forward. Remove cover. Place tray and
cover in dishwasher or wipe parts clean with a soft cloth and warm soapy water.
Sanitizing
Perform: Every 3 months or whenever an off-taste occurs.
Time Required: 30 minutes.
Note: Best to do prior to loading a fresh bottle.
Step A: Remove Existing Water
1. Move dispenser away from wall and turn it 90° in either direction.
2. Turn energy saving switches to OFF.
3. Unplug power cord from wall outlet.
4. Remove water bottle and probe from water bottle.
5. Place a 2 gallon or larger bucket under the drain plug
in the rear of the dispenser.
6. Remove drain cap and silicon plug. Cold water will
immediately flow into the bucket. Several seconds
later hot water will dispense.
Reminder - Place drain cap and silicon plug in a safe
location so they are not lost.
7. Once unit has drained, replace silicon plug and drain
cap.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 888-828-1426 for assistance.
HOT WATER
12