1. Manuals
  2. Brands
  3. Glacial Manuals
  4. Water Dispenser
  5. 75IECHK-SC-SP
  6. User manual

Glacial 75IECHK-SC-SP User Manual

Hot, room and cold bottled water cooler
Hide thumbs
Table of Contents

Advertisement

Quick Links

IMPORTANT: Do NOT Return Dispenser To Store.
PN 75IECHK-SC-SP © 2012 Electrotemp Technologies Inc.
If you have a question or problem, please contact 888-925-2259 for
Hot, Room and Cold
Bottled Water Cooler
Model # 75IECHK-SC-SP

USER MANUAL

TO REDUCE THE RISK OF INJURY AND
PROPERTY DAMAGE, USER MUST READ
THIS MANUAL BEFORE ASSEMBLING,
INSTALLING & OPERATING DISPENSER.
SAVE FOR FUTURE USE
assistance
BF
5M000023XW VA

Advertisement

Table of Contents
loading

Related Manuals for Glacial 75IECHK-SC-SP

Summary of Contents for Glacial 75IECHK-SC-SP

  • Page 1: User Manual

    THIS MANUAL BEFORE ASSEMBLING, INSTALLING & OPERATING DISPENSER. SAVE FOR FUTURE USE IMPORTANT: Do NOT Return Dispenser To Store. PN 75IECHK-SC-SP © 2012 Electrotemp Technologies Inc. 5M000023XW VA If you have a question or problem, please contact 888-925-2259 for assistance...

  • Page 2: Safety Precautions

    Model # 75IECHK-SC-SP :Page 2 SAFETY PRECAUTIONS To reduce risk of injury and property damage, user must read this entire manual before assembling, installing & operating dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage.

  • Page 3: Safety Precautions-Electrical Requirements

    Model # 75IECHK-SC-SP :Page 3 SAFETY PRECAUTIONS ---Electrical Requirements Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.

  • Page 4: Table Of Contents

    Model # 75IECHK-SC-SP :Page 4 TABLE OF CONTENTS Safety Precautions ………..…………………… 2 Safety Precautions-Electrical Requirements … 3 Key information for future use....……… 4 Specifications ………......………… 5 Parts & Features ……….......………….. 5 Assembly ……………......……………… 6 Cleaning prior to initial use ………....…. 6 Installation …………………......……….

  • Page 5: Specifications

    Model # 75IECHK-SC-SP :Page 5 SPECIFICATIONS Power Supply Refrigerant Type R-134A Cold Water Power 100 Watts Cold Capacity / Hour 4L / 1.06 Gallon Cold Temp Range 3°C – 10°C / 37.4°F - 50°F Hot Water Power 650 Watts Hot Capacity / Hour 7L( 80 ) / 1.85 Gallon (>176°F)

  • Page 6: Assembly

    Model # 75IECHK-SC-SP :Page 6 ASSEMBLY WARNING Keep plastic bags away from children. 1. Remove dispenser from packaging. 2. Unpack drip tray and insert into dispenser. 3. Properly dispose all of packaging. CLEANING PRIOR TO INITIAL USE To remove any odors or dust that may collect during shipment, you must clean dispenser prior to first use.

  • Page 7: Installation

    Model # 75IECHK-SC-SP :Page 7 INSTALLATION CAUTION To prevent accidental tip hazard, dispenser must be securely anchored to wall as shown. 1. Place dispenser upright. 2. Locate dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet.
  • Page 8 Model # 75IECHK-SC-SP :Page 8 1. Remove tamper seal from bottle cap. Do NOT remove plastic cap. 2. Clean bottle cap and neck with a soft cloth and warm soapy water, then rinse. 3. Lift bottle and insert onto the probe. Apply slight pressure until the plug inside the cap pushes in and the bottle is seated.

  • Page 9: Proper Care & Cleaning

    Model # 75IECHK-SC-SP :Page 9 PROPER CARE & CLEANING General Cleaning Perform: As needed Time Required: 5 minutes. Note: Do NOT use abrasive materials or chemical cleaners. 1. Clean cabinet surfaces with a soft cloth and warm soapy water, then rinse.
  • Page 10 Model # 75IECHK-SC-SP :Page 10 11. Wipe inside of reservoir and area around both taps with a soft cloth using the mixture of one gallon tap water and 1 tablespoon unscented household bleach. If there is mineral build-up (white chalky deposits) use a household product designed to remove calcium, lime or rust.

  • Page 11: Troubleshooting

    Model # 75IECHK-SC-SP :Page 11 TROUBLESHOOTING Dispenser does not operate. • Make sure the power cord is properly connected to a working outlet. Water is leaking • Call 888-828-1426 for assistance. Push buttons are stuck and/or faucets are leaking. • Apply mineral oil (baby oil) to button slides to reduce friction.

  • Page 12: Limited Warranty

    Model # 75IECHK-SC-SP :Page 12 LIMITED WARRANTY Electrotemp Technologies Inc., (“Vendor”) warrants to the original purchaser of this dispenser, and to no other person, that if this dispenser is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such dispenser shall be free from defects in material and workmanship.

Table of Contents