Proper Care & Cleaning - Glacial 8LDIECHK-SC-WFC-VW-SSP User Manual

Self cleaning hot & cold hidden bottle water cooler with display
Table of Contents

Advertisement

PROPER CARE & CLEANING
Self-clean function covers internal waterways, It does not cover probe stick and external part of
cold faucet hot faucet is sanitized by the hot water itself.
General Cleaning
Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
1.Unplug power cord from wall outlet.
2.Clean cabinet surfaces with a soft cloth and warm soapy water.
3.Wipe dust from back of dispenser to improve efficiency.
4. Remove drip tray assembly by sliding it forward. Remove cover. Wash drip tray
and grice by hand with soapy water.
Sanitizing
Perform: Every 3 months.
Time Required: 15 minutes.
Note: Best to do prior to loading a fresh bottle.
Cleaning the probe assembly
1.Move dispenser away from wall and turn it 90
2.Turn power switches to OFF.
3.Unplug power cord from wall outlet.
4.Remove water bottle and probe from water bottle.
5.Place a 2 gallon or larger bucket under the probe assembly.
6.Dis-assembly probe assembly wash probe parts by hand in soapy
water or in the dishwater.
7.Romove air filter and wash in soapy water.
8.Submerge probe hand in the soapy water and rinse properly.
9.Assemble back all parts of probe assembly.
10.spay dispensing nozzles of water faucets with chlorine solution (1 teaspoon of
unscented bleach in one glass of water ).
11.After 1 minute rinse by spraying with tap water.
12.Place probe into bottle filled with tap water
13.Dispense 1 Gallon of water from both faucets.
14.Remove bottle with tap water.
15.Install bottle with tap water.
16.Dispense 1 gallon of water from both faucets
in either direction.
0
13
LIGHTS
HEAT
ON/OFF
ON/OFF

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents