Assembly; Cleaning Prior To Initial Use - Glacial 8LDIECH-SC-WFC-SSF User Manual

ASSEMBLY

Keep plastic bags away from children.
1. Remove dispenser from packaging.
2. Unpack drip tray and insert into dispenser.
3. Remove protective packaging from around probe.
4. Properly dispose all of packaging.

CLEANING PRIOR TO INITIAL USE

To remove any odors or dust that may collect during shipment, you must clean
dispenser prior to first use.
Time Required: 45 minutes.
1. Move dispenser away from wall and turn it 90° in either direction.
2. Turn power switches to OFF.
3. Unplug power cord from wall outlet.
4. Remove water bottle and probe from water bottle.
5.
Place a 2 gallon or larger bucket under the probe
assembly.
6. Dis-assembly probe assembly wash probe parts
by hand in soapy water or in the dishwater.
7.
Romove air filter and wash in soapy water.
8. Submerge probe hand in the soapy water and rinse properly.
9. Assemble back all parts of probe assembly.
10. spay dispensing nozzles of water faucets with chlorine solution (1 teaspoon of
unscented bleach in one glass of water ).
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 888-828-1426 for assistance.
6
A
B