Operation - Glacial 8LDIECH-SC-WFC-SSF User Manual

OPERATION

This dispenser is intended for water dispensing only. Do NOT use other liquids.
Do NOT use for other purposes. Warranty is void if used for any other liquids
including coffee, tea, juices, beer or wine.
This dispenser has been designed to use water bottles with a 3, 5 or 5.2 gallon
capacity. Do NOT use alternative bottles.
2.
This model uses an pump to force water from the bottle to the reservoirs:
a.
Please do the following:
i.
Clean bottle cap and neck.
ii.
Remove entire plastic cap from bottle.
iii.
Adjust length of probe by pulling B portion of tube to its maximum
extension. Insert probe into bottle and push down. Probe will self
adjust to appropriate length. See illustration on right.
iv.
Push down on probe head until it is seated.
vi.
Insert power plug into wall outlet.
b.
At initial start-up it will take about 3 minutes for the reservoirs to load.
3. Install bottle.
Open door and place fresh bottle in front of tray.
•
Clean fresh bottle with a soft cloth and warm soapy water then
•
rinse.
Remove entire plastic cap from top of bottle.
•
Insert probe into bottle.
•
Push down on probe until it is seated.
•
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 888-828-1426 for assistance.
8
A
B