Dispense Hot Water - Glacial 8LDIECH-SC-WFC-SSF User Manual

Initial Rinsing of Water Lines
This unit has been tested and sanitized prior to packing and shipping. During transit dust
and odors can accumulate in the tank and lines. You must dispense and dispose at least
one quart of water prior to drinking any water.
Dispense Cold Water
Note: After setup, it will take 1 hour to get water to maximum cold temperature. During
this time the compressor may run continuously. This is normal.
1. Position bottle, glass, pitcher or cooking pot securely below cold water tap.
The right triangle below the cold water control indicates the location of the cold
•
water tap.
The circular shapes in the drip plate help align the flow of water. This unit
•
dispenses water at a fast rate. To avoid splashes, hold cup as close to the tap
as possible.
2. Depress right control downward to start flow.
3. Release control once desired fill level is achieved.

Dispense Hot Water

This unit dispenses water at temperatures that can cause severe burns. Avoid
direct contact with hot water. Keep children and pets away from unit while
dispensing. Never allow children to dispense hot water without proper and direct
supervision.
Note: After setup, hot water will be available in 15-20 minutes.
1. Position bottle, glass, pitcher or cooking pot securely below hot water tap.
The left triangle below the hot water control indicates the location of the hot
•
water tap.
The circular shapes in the drip plate help align the flow of water. This unit
•
dispenses water at a fast rate. To avoid splashes, hold cup as close to the tap
as possible.
2. Push hot water release button (red) inward and depress control downward to start
flow.
3. Release control once desired fill level is achieved.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 888-828-1426 for assistance.
10