Quadra-Fire QFI30-C Owner's Manual page 37

Figure 11. Log #4
Log #5 (SRV2225-710): Position Log #5 as shown in Figure 12. Mate the middle and left log pins with the two slots located
on the bottom of the log. See Figure 13 for locations of log slots. The smaller end should be pointed toward the right side
of the fi rebox.
LOG SLOTS LOG SLOTS
Figure 13. Log #5
Log #6 (SRV2225-706): Rest the wide end of the log on the fl at spot of Log #5 as shown in Figure 12 and Figure 14. Place
the narrow end on the fl at spot of Log #2. Flat spot on Log #2 is indicated in Figure 7.
LOG RESTS LOG RESTS
ON FLAT SPOT ON FLAT SPOT
Figure 15. Place Log #7
Log #7 SRV2225-704): Note the location of the groove on the underside of the log. Place the opposite end on the fl at spot
on Log #3. See Figure 9. Mate the groove on the underside of the log with the grate bar as shown in Figure 15, centered
between the andirons.
LOG SLOT LOG SLOT
7 7
LOG GROOVE LOG GROOVE
MATES WITH MATES WITH
GRATE BAR GRATE BAR
Quadra-Fire • QFI30-C, QFI35-C • 2227-901 Rev. H • 7/12
5 5
FLAT SPOT FLAT SPOT
FOR LOG #6 FOR LOG #6
Figure 12. Place Log #5
LOG RESTS LOG RESTS
ON FLAT SPOT ON FLAT SPOT
Figure 14. Place Log #6
MATE LOG MATE LOG
PINS WITH PINS WITH
LOG SLOTS LOG SLOTS
6 6
LOG RESTS LOG RESTS
ON FLAT SPOT ON FLAT SPOT
2225-935C
37