Cisco 7940 User Manual page 7

Supported Features at the University of Wyoming
Call Waiting:
Call Forward:
Call Transfer:
Conference:
Gives you the ability to answer two calls at once.
1. Answer call #1, then the second call will present itself on the
display and the phone will beep once in your ear. If you choose to
Answer the second call, press the Answer Softkey, which answers
the second call and places the first caller on hold.
2. To toggle between the two callers use the Hold Softkey and the
Resume Softkey.
Allows you to manually forward all calls coming into your set. You can
forward to an IP phone or non-IP phone.
To Activate: 1. Press the CFwdAll Softkey
2. Dial the number to which you want to forward
all calls.
To Cancel: 1. Press the CFwdAll Softkey
Allows you to transfer a call to another on-campus telephone number. Calls
cannot be transferred off-campus.
To Activate: 1. With a call in progress, press the Trnsfer
Softkey.
2. Dial the number to which you are transferring
the call.
3. When you hear ringing, press the Trnsfer
again, or when the party answers, announce the
call and press Trnsfer.
4. Hang up to end your participation in the call.
Special Note: To abandon the transfer, press the End Call
Softkey which disconnects the transfer and places the original
caller on hold.
Allows you to set up a conference with nine other parties on or off campus.
To Activate: 1. With a call in progress, press the Confrn
Softkey. This opens a new line while placing
the other party(ies) on hold.
2. Place a call to another party.
3. When the call connects, press Confrn again to
add this party to the call.
4. Repeat the first three steps to add another
caller.
Special Note: To abandon the addition of a conferee, press the
End Call Softkey, which disconnects that leg of the
conference and places the other conferees on hold.