Table of Contents
Advertisement
7193 Service Guide
Appendix D: Connectors
Power Connector
The following illustration shows the power cable connector and pin assignments. The
power cable connector is a 6-pin mini DIN plug and is located in the small cavity under the
printer at the front. It is not used with LCSIO (RS-485) models that receive power from the
host system.
RS-232C Connector
The following illustration shows the RS-232C communication connector and pin
assignments. The cable is communication only. It is not a power cable. The connector is a
9-pin male D-shell connector and is located in the hollow cavity under the printer at the
rear.
August 1998
Appendix D: Connectors
63
Advertisement
Table of Contents
