Complete Installation - Kenmore Dishwasher Installation Instructions Manual

Option A, Install Access Panel - Plastic Panel
Place the plastic access panel against the dishwasher leg.
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
Using a flat-blade screwdriver, turn the fasteners ¹⁄₄ turn
clockwise to lock into place. The fasteners slot will be straight up
and down when properly locked.

Complete Installation

Option B, Install Access Panel - Metal Panel
Check that grounding clip is attached to the lower panel.
Position the lower panel behind the access panel. On some
models there is insulation on the access panel that must fall
behind the insulation on the lower panel.
Hold the 2 panels together and place them against dishwasher
leg. Using a Phillips or ¹⁄₄" screwdriver, reinstall the screws
through the holes in the access panel and the slots in the lower
panel.
23