Drain Line Installation - Kenmore 58714403400 Installation Instructions Manual

Installation Instructions
[STEP 12 ICONNECT DRAIN LINE
FOLLOW ALL LOCAL CODES AND ORDINANCES.
The drain hosemoldedend will fit 5/8", 3/4" or 1" diameter
connectionson the air gap, waste tee or disposer.Cut on the
markedline as requiredfor your installation.
Cutting Lines
4
IMPORTANT:Do not cut corrugated
portion of hose
DRAIN LINE INSTALLATION
• Connect d rainlineto air gap,waste tee or disposer using either
previously determined method.
Method 1 - Air gap with waste tee or disposer
Figure U Waste Tee Installation Disposer Installation
Figure W
• If a longerdrain hoseis required,add up to 42" of lengthfor a
total of 10 ft. to the factory installedhose. Use5/8" or 7/8"
insidediameterhoseand a couplerto connectthe two hose
ends. Securethe connectionwith hoseclamps.
Hose Clamp
Hose Clamp
Coupler
Figure V
• Securethe drainhoseto the air gap,waste tee or disposer
with clamps.
NOTE: TOTAL DRAINHOSELENGTHMUSTNOT EXCEED
10 FEET FORPROPER DRAINOPERATION.
Method 2 - High drain loop with waste tee or disposer
Fastento underside
_ _ of counte[top
,
Waste Tee Installation
Fasten to underside
_/._ of countertop
32"
Disposer Installation
Figure X
IMPORTANT -
Whenconnecting drain lineto disposer,
checkto be surethat drain plug hasbeen
removed. D ISHWASHER WILLNOT DRAIN
IF PLUG IS LEFTIN PLACE.
_ emove
Disposer
Plug
TIP: Avoid unnecessary servicecall charges.Always be sure
disposerdrain plug has beenremovedbefore attaching dishwasher
drain hoseto the disposer.
10